RockSolid™

RockSolid™ Universal Bonding Floor Primer


Click to Enlarge

Grey
314858 - Kit

Select a Color (1)

  • Kit :

About RockSolid™ Universal Bonding Floor Primer

RockSolid Universal Bonding Floor Primer is a premium solvent-based primer/bonder with excellent topcoat adhesion, designed for use over previously coated garage and interior concrete floors. No sanding, stripping or grinding is required. The coated floor must be clean and properly adhered prior to priming. After applying Universal Bonding Floor Primer, the floor is ready to be topcoated with any opaque epoxy, 2-part epoxy or RockSolid Polycuramine.

RockSolid Universal Bonding Floor Primer is intended for use in garages, basements, workshops, laundry rooms and other interior applications. It is not intended for areas exposed to direct sunlight. DO NOT leave container in direct sunlight.

The RockSolid Universal Bonding Floor Primer kit includes the following:

  • Instructions
  • Polycuramine Burst Pouch
  • Concrete Etch
  • 230 mm Nap Roller

Items not supplied with the kit which need to be purchased separately:

  • 230 mm Roller Frame
  • Extension Pole
  • Stiff bristled Broom or Scrub Brush
  • 75 mm Paint Brush
  • Paint tray

Other optional items that may be needed:

  • RockSolid Fast Patch Concrete

For Best Results

Previously coated floors need to be in good condition with proper adhesion to the concrete substrate. Check the adhesion of the previous coating by cutting a small X through the coating down to the concrete using a sharp razor knife. Firmly apply a piece of duct tape over the center of the X cut, and then remove with one quick pull. If more than 25% of the paint comes off, the previous coating is not in

Available Sizes

  • Kit

About RockSolid™ Universal Bonding Floor Primer

RockSolid Universal Bonding Floor Primer is a premium solvent-based primer/bonder with excellent topcoat adhesion, designed for use over previously coated garage and interior concrete floors. No sanding, stripping or grinding is required. The coated floor must be clean and properly adhered prior to priming. After applying Universal Bonding Floor Primer, the floor is ready to be topcoated with any opaque epoxy, 2-part epoxy or RockSolid Polycuramine.

RockSolid Universal Bonding Floor Primer is intended for use in garages, basements, workshops, laundry rooms and other interior applications. It is not intended for areas exposed to direct sunlight. DO NOT leave container in direct sunlight.

The RockSolid Universal Bonding Floor Primer kit includes the following:

  • Instructions
  • Polycuramine Burst Pouch
  • Concrete Etch
  • 230 mm Nap Roller

Items not supplied with the kit which need to be purchased separately:

  • 230 mm Roller Frame
  • Extension Pole
  • Stiff bristled Broom or Scrub Brush
  • 75 mm Paint Brush
  • Paint tray

Other optional items that may be needed:

  • RockSolid Fast Patch Concrete

SKU
Colour
UPC
Safety Data Sheets (SDS)
note: To view the SDS or TDS you need to have the Acrobat Reader Software.